MQTT-ESP8266

I tried it like that and it also created a device with an On/Off-Entity but it does nothing. The valve stays silent.

Thanks for your time. I tried to integrate this quirk but I get an error: ``` Logger: homeassistant.config_entries Source: custom_zha_quirks/ts0601_sh1btabb.py:27 First occurred: 14:14:09 (1 occurrences) Last logged: 14:14:09 Error setting...

I tested it but it does not work. The valve is not opperated by the generated entity nor is the battery-level shown  .

Sorry, I am a beginner. I attached the LOG that is written during paring of the zigbee device and also the HA system log during this time. Are these the...

I switched on debuging and these are the entries during manually switching the valve 3x on and off: home-assitant.log ``` 2022-06-16 00:18:11 DEBUG (MainThread) [bellows.ezsp.protocol] Send command readCounters: () 2022-06-16...

This log was written during pairing of the water valve and then manipulating the switch in HA several times. home-assitant.log ``` 2022-06-16 11:39:09 DEBUG (MainThread) [bellows.zigbee.application] Free buffers status EzspStatus.SUCCESS,...

Is this the log you were looking for?

It still does not work. It is the same as before. A HA-device is created with a switchable entity but this entity does not switch the valve. I attached the...

> Sorry but I can't see the logs from HA interaction. Enable the debug logs and attach only relevant info from device. If you are not able to get the...

Thanks you, @infinitejest ! I can confirm that this works for the TZE200_sh1btabb Model