127.0.0.1

Tried #97 to still have issues. Checked installed directory, there is no install.bat ? So, how can I go about changing this from the installed version of 2.6 which on...

Now this is something I did not check and can confirm I have the same issue.

I have this issue also but I have a different folder layout. I am adding this to a Angular-CLI project, everything else is fine if I write the whole path...

I don't know if it will help you but you might find some things this repo that I put together [here](https://github.com/Local9/AngularBDD-serenityJS) with the help of @mdasberg it works as intended...

@vinibas and @rall I have updated my repo to now use the latest version of Angular.

I have personally done this a few times, run two clients on the same machine with maxed out graphic settings so FPS drops are noticable. After the first client has...

I don't even know why you're using the ngModel, it works fine without it if using formControlName. The ngModel is only being used as a hack in the examples in...

Reactive forms does work, only the documentation on reactive forms needs updating. @CuppaLabs change the following, I believe was a copy and paste error for efficiency; https://cuppalabs.github.io/angular2-multiselect-dropdown/#/usinginreactiveform Remove: selectedItems and...

@BigGillyStyle Please make sure you have updated the 'primaryKey' in the drop down settings as by default this is 'id'. This was my problem when I wasn't sending an 'id'...

@Korigoth I'd look into how the process is running during its setup as it should be setting it as shown below. ``` ngDoCheck() { if (this.selectedItems) { if (this.selectedItems.length ==...