Linkenelis
Linkenelis
"I start with adding an UDP" This is for interaction between MiLight-hub and another device (mostly a server like iobroker), but not a lamp. The sequence to add a lamp:...
version 1.10.6 I have IOBroker with build-in (plugin) MQTT, both state and update are set when changes happen. MQTT for MiLight hub is only used for timer commands (On/Off), as...
From IOBroker using UDP to Milight-hub, then reading MQTT. but still not the same :-) I wil try the T4...
Hmmm. I have 2 devices in MiLighthub device 0x1 and 0x2. The wallswitch (a T4) reports on 0x2227 state and update in the same manner as the MiLight-hub mqtt.0 ->...
Oh same for update..
Oops sorry! got things mixed up... I tried group 1 on the T4 (device_id = 0x2227 I put a screenshot, so there can be no mistakes 
ML01DP5 (high power) works OK, the nRF24L01 works fine, but is unreliable through 2 concrete floors. Soldering the wiring is preferred to connectors. When testing I use the connectors and...
Hi, there is always a limitation... But how many lights need to be changed per minute (or 5 minutes)? There is only 1 sender/receiver between hub and lamp (bulb). So...
I don't need the passwords :-) Just to see if deviceID's, MQTT or UDP are not messing things up. Very strange that on/off switching causes some others to change brightness....
Yes, i figured someting like that. Still, an on/off command that influences the brightness (or level) of another bulb is weird. And can (normally) only be done with some scripting....