Braidan

I have it set to 1 right now. Experimented with 16 and 32 but they also require weird increments to work properly. Is there an equation I'm missing to get...

Ok. I just tried it. For some reason at 16 microsteps, the motor just goes crazy; it starts whining and stuttering. It works just fine at 32 microsteps though. Any...

Interesting. Is there much of a torque difference between the microsteps (i.e. more steps=more torque) that yo know of? On Tue, Nov 13, 2018 at 4:16 PM teemuatlut wrote: >...

I see. Thank you for your assistance. Another follow up question: what's the best way to adjust the motor speed? Is there a dedicated register or method I can use?...

Excellent. Thank you On Nov 14, 2018 04:35, "teemuatlut" wrote: Control the time between sent step pulses. — You are receiving this because you authored the thread. Reply to this...

Hey, I've been trying to get the StallGuard example working with my set up and I can't get a reading off of it. The motor functions just fine, however, it...

Ok. I'll try lowering it to the negative extreme and see if that works. Thanks for the response

Ok. I'll have to inspect mine then. I got the Fysetc clones so that's probably where most of my issues are. Definitely going to limit my Chinese purchases in the...

I've got it working now. Thank you

Finished the initial release. Need to test and validate