Leon Kiefer

Currently pi Pico and other Samd boards can not be used as Command Pro, because the Commander Pro depends on low level hardware configuraiton, which currently is not adapted for...

To support new devices we need some technical details about them, USB IDs and capabilities. It's best if someone has the device to provide this information. However, new icue devices...

Will look into it when I find some time

@GodlyOverlord @VikasMulchandani You need to update iCUE 4 to the latest version (check in the iCUE settings that you have version `4.25.155` or higher) and create a LNP with this...

The link does not work and I can't find any reference for the iCue Commander Core.

10 k ohm Thermistor should work

I think it should be possible to support the Commander Core, now only the USB PID is required, so iCUE will detect it.

The features of a commander core can already be realized with this library, just combine the commander pro and the [MultipleFans](https://github.com/Legion2/CorsairLightingProtocol/blob/dev/examples/MultipleFans/MultipleFans.ino) example. The USB PID can be obtained from the...

> Device Name: CORSAIR iCUE Commander CORE PID: USB\VID_1B1C&PID_0C1C Looks good, I will try this weekend to create a sketch for the commander core.

I tried to use the PID and iCUE tries to use the devices, but it does not show up in iCUE. Here is an excerpt from the iCUE log: ```...