Lev

is it possible it could be ported from SuperSlicer? It's inconvenient having to put some single layer priming objects in between or do something else to work around this limitation....

Hi, no, currently there is no such option and there is no plan for implementing it either. It is easier to get magnets glued in or press fitted as it...

At this point rounded corners are the standard. They should print well, I would try tuning print settings to see if that helps, very often issues on overhangs mean too...

I'll try to reproduce. Just wondering, are you doing that with base magnet sockets/screw holes enabled or disabled? Asking because that could be the source of square-ish complexity for pattern...

tried to reproduce, I can see that "shelled" option takes quite a bit longer comparing to "hollow", but it still succeeds for me within a few seconds. When I increase...

I was trying it on an m3, will give it a try on a windows machine when I get a chance. To my knowledge fusion neither takes advantage of multi...

tried it on Win 11, with Ryzen 5 3600x (I think it's 4.4 GHz), it didn't freeze while generating this 10x10 shelled bin, took a bit longer, just under 25...

you could try to generate solid bin and apply shell operation manually to it to see if it would get stuck as well

Hi, thanks for the feedback. It looks like this has been raised before https://github.com/Le0Michine/FusionGridfinityGenerator/issues/20, after some testing the clearance was set to extra 0.5mm comparing to what it was before....

Hi, thanks for creating the issue. That seems like a nice idea. Unfortunately, from what I've seen with simple round socket there won't be a default press fit size which...