Aaron Haun

CCL should print a warning if mappings were specified but not valid

2

If mappings are specified (in config) but invalid, CCLib currently just plays the guessing game, which can sometimes cause the wrong mappings to be selected (especially when ForgeGradle is used...

linux: Add options for setting group and mode

7

This adds support for providing a group name and permission bits to the linux process "mcu". This is useful in situations where the process connecting to klipper is running as...

### OrcaSlicer Version v1.8.1 ### OS version Linux 6.6.6-1-default #1 SMP PREEMPT_DYNAMIC Mon Dec 11 09:46:39 UTC 2023 (a946a9f) x86_64 x86_64 x86_64 GNU/Linux ### Additional system information ``` System: Host:...

Rapido 2 Toolhead: Orientation in README.md not correct.

3

The supported orientation in the markdown file at STLs/Stealthburner/Printheads/phaetus_rapido_v2/README.md indicates that the grub screw should be at 4:30, and the wires at 12:00, with the screwhole nearest the wires at...

When moonraker is built with `--base`, it still tries to get config.json from /

2

### Mainsail Version: g932a2c35 ### Browser: Firefox ### Device: Laptop ### Operating System: Windows ### What happened? After building mainsail with --base=/mainsail/, and serving that at /mainsail/ on an httpd:...

Add support for moonrakers at paths

1

### Requested feature: Add support for moonraker instances served at paths other than /, either with moonraker's new `route_prefix` option, or with reverse proxy settings. ### Solves the following problem:...

### Is your feature request related to a problem? Please describe This was related to my not setting a sufficiently high txqueuelen after moving to a canbridge setup in preparation...

[Enhancement] flashtool.py: Guardrail to prevent flashing wrong MCU type.

1

I'm not entirely sure of the feasibility of this, as it relies on being able to reliably extract the MCU type from a klipper/deployer image to be deployed. Information about...

[Enhancement] firmware: Support reporting the current version of Katapult.

1

Add a command (or extend CONNECT) to report the version of canboot (possibly from `git describe` or a `.version` file if not in a git repo at build time). This...

[Enhancement] flashtool: Support gathering system information (such as MCU name in the CONNECT response) without flashing.

1

It would be nice to be able to get MCU type and other details from a device without actually starting a flash cycle, similar to the information provided when starting...