Kuchiru

Uhm, i have the reverse issue on this type macbook here, the integrated GPU causes constant kernel panics and is unusable. Booting ubuntu doesnt seem to work, nosplash nomodeset xforcevesa...

> I believe you can already do this by creating 2 Adaptive Lighting switches for the same set of light. On one of them you need to disable the adapt_brightness...

I think i have the same issue so i'll add the required info as i'm interested if there is a solution to this as well. For me the best example...

@agirilovich i see you committed the yaml for this device, would you have any pointers on this issue?

> Workaround based on [this comment](https://github.com/Koenkk/zigbee2mqtt/discussions/13156#discussioncomment-4491986): Add an `mqtt.publish` message to enable `execute_if_off` and `mqtt.publish` a message to set the `color_temp` wanted before the light is turned on. > >...

So it is intended to always transition from the last state that the lamp was on? for example i have my sleep mode set to 1% brightness for all lamps,...

Im getting this error daily now, switched from a slae.sh stick to the 06M, using channel 25, my own wifi networks are on 1 and 6. Some Neighbors are on...

With this in mind i increased the resources available to my z2m VM, it sits in a low resource alpine container. It had 1 core and 256mb ram which is...

Hi @Nerivec, Im running 2.6.8 dev21 for both logs with the latest dev firmware available for zigbee, 202411xx i believe. Changes in sysctl for tcp keepalive: ``` net.ipv4.tcp_keepalive_time = 60...