Ksdmg
Ksdmg
I'm facing the same issue. Would be awesome if someone could provide a solution.
I have the same issue. We use Jira and Bitbucket to create the branches, thus they have ticket names in the branch names. The following release branch `release/ICO-5-release-v1.1.0` is producing...
I have the same issue on a fresh install
@codecadwallader , thanks for the response, here is the config file [CodeMaid.txt](https://github.com/codecadwallader/codemaid/files/7579118/CodeMaid.txt) .
Is it somehow possible? I have installed Overseerr through snap. Sonarr/Radarr can only be reached through reverse proxy with self signed certificate (internal CA). I tried adding the root CA...
hello @whalecoiner , can you offer a step-by-step tutorial how you have flashed the card? I have two D2607 and would like to flash them too. I just don't want...
I can now also report a successful flash. My first attempt failed, using the extracted sbr and changing values. For me it only worked with the patched sbr from @marcan's...
Is there any way to get the comments to work in the generated client? I mean, it's all there as you already typed. I'm wondering why nobody else is interested...
So I'm new to this too, but maybe this could work: Z_AXIS_OFFSET -8 results in the following command: https://snapmaker.github.io/Documentation/gcode/M206 -> M206 Z-8 As the M206 command can receive multiple axis,...
This only works if all tools are the same length. I have a rough cutter with 4x75mm , and a 1x50mm for finishing. I would use the Zoffset action when...