KrX3D

Mqtt -> qos and retain not set right

4

### What happened? hello, im trying to creat an usermod which send out some mqtt parameters, but the qos and retain is not set right. doing something like this: ```...

Hello, i wanted to share my config with you for Esphome:   Features: - Pull Height on boot - Set wifi static ip - ESP Status - ESP restart...

Themperatur wird nicht richtig gesetzt.

24

Hallo, seid gestern stimmt die Temperatur bei mir im Wohnzimmer nicht mehr. Morgens sollte für einige Zeit der Thermostat auf 30.5 gestellt sein, jedoch ist er auf 19.6 Grad. Einige...

Activate when Temperature below XX Celsius

5

Hello, could you please add an option simular to the heating period, to activate the profile only if a temperature is below XX Celsius? so if a value i.e. "20...

Invoke-Restmethode won't timeout

13

# Steps to reproduce Hello, i got this code here for demonstration: `Invoke-RestMethod -uri "https://XXXXXX.blob.core.windows.net/XXXXXXXX/XXXXXX/SOURCES/PE10.WIM?st=2020-02-20T13%3A08%3A43Z&se=2021-02-21T13%3A08%3A00Z&sp=racwdl&sv=2018-03-28&sr=b&sig=SIGNATURE" -OutFile "C:\Users\testUser\Downloads\DL\PRG\test.wim"` when i use that code i can get the download. Firstly to maybe...

Feature Request: Open Output Folder / Github link / Setup Page

7

hi, 1. i think it would be nice to have a button to open the output folder ---> PATH\Fooocus\outputs 2. i also would like a github link somewhere on the...

not able to download KB4052623

1

hi i tried to dowload the update with `Save-KbUpdate -Name kb4052623 -Architecture x64-Path C:\Updates` but i always get this warning `WARNUNG: [18:40:51][Save-KbUpdate] Could not find architecture match, downloading all` it...

Add Sensors to card

3

## What is the feature? Hi, i want to add additional sensors to the card which should be shown ### Description Till now i used the simple-thermostat card, and there...

Homematic IP Problems with behavor of BT

2

### Prerequisites * [] Model name of your Devices Homeatic Ip HmIP-eTRV-2 * [ ] Output from Home Assistant Device Diagnostic from BT { "home_assistant": { "installation_type": "Home Assistant OS",...

Feature: Fileversion on Installer / Silent switches

1

Hi, it would be nice if the installer.exe would have under fileproperties the correct fileversion i.e. 2022.14.0  also the silent switches for installation sometimes do not work properly? im...