KondratokGK

It possible to make esp32 elrs multipurpose device for ExpressLRS-RX, ExpressLRS-RX, ExpressLRS-backpack, lora, ESP32Marauder and another similar firmware on same hardware?

Just connect RSSI1 and RSSI2 to ADC pin, configure this and have VRX rssi as telemetry on your edgetx. Create some special functions on edgetx, add switching VTX power by...

Jumper t20 gemini

4

Is the Jumper T20 gemini supported?

May be use [crowdin](crowdin.com) or similar tool?

Hardware Requirements for EdgeTX> type C power delivery support

1

Many rc radios does not support charging from pd type c port. PD does not provide 5v at any time, it waits for pull-down resistors on CC1 and CC2 pins....

I want to add WS2812 to my T20. How to add PWM pin to device configuration or something like that.

Dynamic temperature setting (automatic boost)

2

**Is your feature request related to a problem? Please describe.** When i solder small smd and hard-to-solder components one-by-one. I forsed to press boost button for a long time on...

EzLanding: better landing detection

4

### Is your feature request related to a problem? Please describe EzLanding active when drone in free fall. ### Describe the solution you'd like Add additional condition for EzLanding: Enable...