Kobbe1

Hej, same issue here, getting this back, which I guess confirms the connection is fine. I was so excited when I found this project - but had some doubts as...

Quick update, I am very sure now this is the same protocol as here in #46. To confirm I modified a few things according to the guidance from @raomin in...

Almost there (I hope). Implemented as per your kind guidance. 0x50 gives no response - which actually correlates with the screenshot from #46 - no "HP Sensor" & "LP Sensor"...

Sure. Things work more or less. I had to manually assign the correct descriptions by comparing to the values displayed on the unit, and also changed some of the converters....

Here is how I left it back then. Not all of them give useful data but getting most important temperatures and wether unit is on or off. Has been in...

Thanks, looks different indeed. Yet another version - with an DS18B20 and an different RTC IC too.

@aleksey-ru52 So the hwconfig.h you shared works? You said it compiles, but I guess you did not test with real hardware? > i suppose it can/should be fixed in hwconfig.h,...

@aleksey-ru52 Great! What is the deal with the other repo, is this a fork of this one here? But for a different hardware? I certainly will rewire the 3 connections,...

Thanks! Re: 3 connections - you said you reconnected 2 buttons and the thermistor. But I understand now you only did that as you burnt P1_0 so I wont need...

@aleksey-ru52 Just tested this from this repo and your above workaround, worked fine. Temperature is off, will take a look but not important.