KeltE
KeltE
Prucaslic3ril has a "send to printer" button. It only sends to octoprint. Or, if you check the "start printing" box, the printer will go against the limit switches and start...
At first I thought that one working solution exists and can be expanded a bit. Maybe somehow you can access the files inside the Octop, and do the same as...
Hello! Many thanks. Now it no longer keeps the connection active but disconnects after a while. Could it be that I upgraded Octoprint? I also add the Octoprint terminal lines...
No need to apologize. I'm glad someone is bothering to deal with the problem :). I tried and did a new installation of octopi and got nicely connected now. the...
Hello! Sorry that the answer took so long. I looked at a very good table made with different printers. I also tested the Motion, Temperature, Lights On / Off and...
Yes, as you describe. I send the work used for the test. [Vooliku-hoidik_0.2mm_ABS_11m_Pause test.g.zip](https://github.com/Mrnt/OctoPrint-FlashForge/files/5182993/Vooliku-hoidik_0.2mm_ABS_11m_Pause.test.g.zip) I got a solution for how I can send the files inside the octoprint to the...
Hello! Why does Octoprint occasionally send an M601 S0 request to the printer and disconnect the USB connection to the printer? Printed the same G code 7 times and happened...
Polarcloud does not support the Dreamer Nx printer. So I have no connection there. Over Wifi I enter the Octop environment through the router. Fortunately, it doesn't interfere with printing...
I think the subject can be locked at the moment. All the buttons, bells and whistles work that I've tested. The commands in the Dremel.Gcode.protokoll.Pdf file also work beautifully on...
Yes I will let you know if I can repeat the interruption. It seems to be happening too randomly at the moment. Hard to track that way. During the second...