better_thermostat

better_thermostat copied to clipboard

Add support for homekit_controller

10

## What is the feature? HomeKit controller TRV support. My use case is Tado TRVs **via HomeKit** (as a means of forcing cloud-free Tado) ### Description HomeKit controller is not...

ghost

Support for zwave

3

### Prerequisites Danfoss LC13 ### Description This one not communicate to the zwave , Also calibration for local selection not there ?

mupsje

Support for simple valve switch

2

I would like to see support for basic switch relays. In my house I have only floor heating system, so only way to control the temperature is open/close valve by...

mokry

Overheating AVM Fritz 301

2

### Prerequisites * [X] Model name of your Devices: AVM Fritz 301 * [X] Output from Home Assistant Developer Tools state e.g. BT: ``` hvac_modes: - heat - "off" min_temp:...

N1c093

HVAC not switching off on low temperatures

1

### Prerequisites * [X] Model name of your Devices Mitsubishi SEZ-M25DA via melcloud integration * [X] Output from Home Assistant Developer Tools state e.g. ``` hvac_modes: heat, off min_temp: 10...

Christian-Thiem

Indicator for faulty devices

1

## What is the feature? ### Description First of all I'd like to thank everyone working on this project. It's really awesome! #### My issue I ran into the situation...

hpuac

Error about not supported service call when used in a scene

2

### Prerequisites * [ ] Model name of your Devices * [ ] Output from Home Assistant Developer Tools state e.g. * [x] Output from Home Assistant Device Diagnostic from...

jkrenzer

Logger: homeassistant.components.climate.const Source: helpers/deprecation.py:205 Integration: Klima (documentation, issues) First occurred: 5. Januar 2024 um 19:24:41 (1 occurrences) Last logged: 5. Januar 2024 um 19:24:41 SUPPORT_TARGET_TEMPERATURE was used from better_thermostat, this...

chma73

BT: Integration does not re-enable thermostat after opened window is closed again

5

### Prerequisites * **Model name of your Devices:** eTRV0100, eTRV0103, TS0601. Information below is provided from **eTRV0100** (=Danfoss Ally). All other thermostats show the same issue. * Output from Home...

Malachi801

Split heating/cooling

1

## What is the feature? At this point, when adding the cooling option, the thermostat automatically chooses the heating/cooling state based on the set temperature. However I'd like to have...

kimme1024