Kadah
Kadah
Use DejaVu, most Linux repos already have it, and could likely automate downloading it if not provided by the system.
Ditto. Here's the tail of the verbose output. ``` # /home/kadah/anaconda3/envs/ldm2/lib/python3.8/site-packages/google/protobuf/__pycache__/descriptor.cpython-38.pyc matches /home/kadah/anaconda3/envs/ldm2/lib/python3.8/site-packages/google/protobuf/descriptor.py # code object from '/home/kadah/anaconda3/envs/ldm2/lib/python3.8/site-packages/google/protobuf/__pycache__/descriptor.cpython-38.pyc' # /home/kadah/anaconda3/envs/ldm2/lib/python3.8/site-packages/google/protobuf/internal/__pycache__/__init__.cpython-38.pyc matches /home/kadah/anaconda3/envs/ldm2/lib/python3.8/site-packages/google/protobuf/internal/__init__.py # code object from '/home/kadah/anaconda3/envs/ldm2/lib/python3.8/site-packages/google/protobuf/internal/__pycache__/__init__.cpython-38.pyc' import 'google.protobuf.internal' #...
I manager to get it to work by recreating the env a few times till I accidentally forgot to install the documented additional package and went about manually resolving the...
If I'm reading the datasheet right on the AEDR-8300, the code wheel will need to be 8.35 lines/mm (212 LPI), which seems like it would be somewhat difficult to print.
The L293 is quite outdated, I'd got for a more modern high efficiency driver instead. I've been using the DRV8833 recently on other projects and I quite like it. Its...
I used the print head motion assembly from a salvaged inject for the x axes of my first printer using this project to control the DC motor on that. It...
@misan The cogging(?) angles of the particular motor and pulley weren't enough to small moves to be a thing with it. I think the best it could do was 45degs,...
@misan Yup, its an HP one but it was a weird 13.4V printer I believe. I kept the plug pack from it somewhere, figured it make a good source for...
I haven't verified this, but you might not need this library anymore with the current version of the Espressif ESP32 Arduino core. Remove this library and try again. As for...
Inpainting throws this error for me if there is any new lines in the prompt. `AttributeError: 'NoneType' object has no attribute 'groups'`