JvHummel

I could see myself using this feature. Now I maintain a playlist "Watch Later" in which I add videos from the main feed, and filter myself. However, there would have...

I might have had a similar experience yesterday. After months of stable operation, I restarted Home Assistant, which then wasn't able to connect over the socket anymore. The web page...

Hi, Ended up here after having the same issue. Updated from 0.9.5 to 0.10. 2023-02-02 23:49:12 - reboot cause: Exception (2) - Access to invalid address (28) ESP register contents:...

Since the resets stop happening for me when I disconnect the OpenTherm connection, I'd wager it must be something device-specific. i.e. thermostat/boiler send data the firmware doesn't like. I'm headed...

Hi Dave, Yes, of course. The following is my setup: - Boiler: Intergas Kombi Kompakt HReco 30 - Thermostat: Honeywell ChronoTherm Touch Modulation Just did some tests. - Connecting the...

@hvxl Can you confirm that this will work? Based on the manual for HW rev. 2.3, it seems not to be meant for this usecase: "Do not connect a Micro...

Hi all, I did a USB/TTY readout as @hvxl suggested. I've attached a log file. Hopefully it can shed some light on the situation. [putty.log](https://github.com/rvdbreemen/OTGW-firmware/files/10580875/putty.log)

@LacsapOV My board is also new, soldered it just 2 nights ago :) But shipped with v0.9.5. My theory is that nodo-shop batch pre-programs them ahead of time. Anyhow, you...

I, too, have been experiencing this bug for a long time now. Notes: - Changing or re-selecting subtitles before the previous selection has finished loading, generally also results in double...