Juraj Nyíri

If you get unknown error it logs an error in error log, please provide this.

Not a integration issue. Make sure you are not overloading the camera, make sure you have all ports opened and set up network properly and finally restart everything.


Hello @dankocrnkovic I have pushed a version with debug logs into main branch. Please download that manually (not available on HACS) and configure [logger](https://www.home-assistant.io/integrations/logger/) to log debug for this component....

Hello yes it is.

My version on C200 is 1.1.7 Build 210406. Yours seems to be from January. Maybe they have different versions for C310 or are rolling it out in phases which is...

That confirms my belief that the Home Assistant event manager is not able to recover properly. ``` logger: default: critical logs: custom_components.tapo_control: debug homeassistant.components.onvif: debug ``` Lets add debug for...

Hello yes I tested it before sending. Try to add it, make motion so that sensor shows up and reboot camera, you should get log from onvif.

Did you add log also for onvif? I can't see anything from it in the logs and there should be something there where it attempts to recover. 1. Add logs...

Please verify that the log for onvif is working. Without it waiting for logs from tapo brings no new information.