Jon Sturm

I just imported an exported solvespace model into 3 different commercial CAD and CAM software packages and they all imported it as a "solid". The software I used were Autodesk...

[10mmcube.zip](https://github.com/solvespace/solvespace/files/925840/10mmcube.zip) I've attached a a 10mm cube model that has been exported from PowerShape which does not exhibit the issue in FreeCAD, other than being about half the number of...

I have tracked down the issue to being what I and @whitequark initially thought, the step file output not reusing the EDGE_CURVE objects along shared edges. I modified the 10mmcube...

I have a P6F and it bound using the DumboRC protocol just fine so I do not believe anything has changed there especially since it should work with the original...

> Suggest changing Model Type page to list Air and Surface option types and add a new two new pages moving sub-types to separate Air and Surface pages to avoid...

> i forsee the following: > > 1. plane > > 2. heli > > 3. quad > > 4. crawler > > 5. track-based (tanks etc, no 'steering axle')...