Jonbuckles comments

Repositories
Issues
Comments

Results 2 comments of


                                            Jonbuckles

Serial gimbal does not work with Walksnail Gimbal firmware V3.2

Ive also tested this on FW3.3beta with no luck from https://www.allxianfei.com/en/h-pd-138.html I noticed GimbalConfig software is a little different and has channel assignment dropdown menus. ![image](https://github.com/user-attachments/assets/24c2379a-1067-404c-9e95-aae167c71fbd)

Serial gimbal does not work with Walksnail Gimbal firmware V3.2

So I was able to successfully use the channel assignment tabs in the FW3.3 gimbal software above. I assigned my CRSF channels (8,9,10,11,12) to the MODE SENS ROLL PITCH YAW...