John Traver

The DRBG used within Caliptra needs to be changed from SHA-2-384 to SHA-2-512. Tests must be updated to meet the new requirements.

Crypto functions must Assert that KAT ran in Debug. It is required that KATs are run before any crypto functions are used for other purposes. Thjere should be an assert...

FIPS Functional Test Suite

1

Requirement: A FIPS Functional Test Suite needs to be created and maintained to meet all FIPS testing requirements. This functional test suite will focus on the interface of the FIPS...

First Draft of Caliptra Trademark Audit

2

First draft of the Caliptra Trademark Audit for discussion.

Create Caliptra TradeMark Approval Program

We would like the FW Status register value to be sent out to the SOC over wires so that the SOC could decide how to expose these. f an SOC...

Compile Option in HW to Disable the ECC check on SRAM

2

Requirement: Compile Option in HW to Disable the ECC check on SRAM. Some integrators could have the ECC check and verify on the wrapper SRAM side.

Caliptra Base Address and Corresponding HW Addresses

1

Caliptra RTL is hardcoded to an address. We require that a wrapper provide Caliptra RTL a base address and that the RTL will reference that base address at compile time....