pcbgcode
pcbgcode copied to clipboard
JohnAtl
This is the repo for pcb-gcode, a plugin for the Eagle schematic and board layout program. This plugin allows you to make printed circuit boards without chemicals using a router or milling machine.
Hi John, I tried to give rounded corners to my last design and used "miter" in Eagle to form the rounded corners. The design looks exactly as expected in Eagle:...
I'm trying to use PCB-Gcode in Fusion 360. I have installed PCB-Gcode 3.6.2.4 it into the same directory as the rest of the ULPs. The good news is that the...
Hi John, another point I stumbeled over when milling my current board is this: Milling the circumference of the board needs to be as deep as the boards material is...
Eagle Ver 9.6 PCB_GCODE ver 3.6.3 Repeatable: Yes. Requesting drill only:  First hole is OK, subsequent holes use the "Spot Drill" depth. This is a snippet from drill file....
If I place a wire around the board outline in the miling layer, the generated milling path is clockwise around the board, so the mill works climbing. As with etching,...
If I make a one sided board, I select "generate top xxxx". Especially for "milling" - in the sense of "cutting the board outline" or "cutting a hole" - seems...
Hi John, you might add EAGLE version 7.x to the proven as compatible versions in the "setup" ULP. I use version EAGLE 7.7 since a long time and had no...
Hi John, another topic I stumbeled over when milling the outline of my boards is, I miss holding tabs distributed around the circumference of the board to hold it in...
I John, here I show you what I have done using 3 bits: 0.10 - 0.7 - 3.0 and here I have implemented: I have run pcb gcode 3 times,...
From Dave Z: Hello. I love the pcbgcode add on but I can't use it. I have an ATC on my stepcraft 420 machine which is what I use for...
