Johl

[2022-08-02 10-41-53.txt](https://github.com/obsproject/obs-studio/files/9242695/2022-08-02.10-41-53.txt)

I havent tried downgrading drive yet.. but in the past i was with the current stable driver and i had multiple instances of the encoder overloading... so, similar behavior. Overloads...

Tried with driver 22.5.1(thou not clean install) and the encoder behaved the same.

Ohh, sure.. mb, thou this info is already inclued in there.

> Same issues here. Had to revert to using software encoding [2022-09-11 10-08-49.txt](https://github.com/obsproject/obs-studio/files/9542818/2022-09-11.10-08-49.txt) [2022-09-11 10-30-11.txt](https://github.com/obsproject/obs-studio/files/9542819/2022-09-11.10-30-11.txt) [2022-09-11 10-34-05.txt](https://github.com/obsproject/obs-studio/files/9542820/2022-09-11.10-34-05.txt) [2022-09-11 10-48-14.txt](https://github.com/obsproject/obs-studio/files/9542821/2022-09-11.10-48-14.txt) The issue has been fixed in between rc2 and 28 stable...

Yep, scenecut(scenehange) for real time livestreaming only hurt quality, also agree on bal preset, for higher end models qual is prob a no big deal but on my card for...

To add some things ive noticed regarding some of the settings in this post. For the PA engine i would suggest either to use Vulkan or DX12, ~~from some testings...

Some way to tweek VBAQs 'strenght' would be good, its tuned quite high... or so it seems.

> At this time, we do not have plans to provide a VBAQ strength parameter. > > Also, it is suggested to increase the target bitrate to 6000000 bit/s for...

> The stream that was attached is about 118.36kbps which is too low for 1080p 60fps. > > This issue was originally opened back in July. At that time, the...