JoelWise

This could be what you are looking for: https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/flashing-and-debugging-nrf5152-with-a-cheap-blackm

For a device who's primary function is to monitor moisture levels I think it's a big win to make it easier to set dry points. I already do this in...

[Capacitive touch sensing pad](https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk5.v12.0.0%2Fhardware_driver_csense.html&cp=4_0_0_2_1) but it would be hard to use if you use a case. Or a [small reed switch ](https://www.digikey.com/short/bm0020d5)activated by strong magnet. Though, I think a normal...

That makes sense. It's pretty simple to add some pads for an optional button and you could design the footprint to be compatible with more than one button type (push,...

You might want to take some design inspiration from [weather station shields](https://www.google.com/search?q=weather+station+shield&source=lnms&tbm=isch) to maintain temp and humidity accuracy. I've also seen prints with a 1.75mm hole so a clear piece...

Sounds cool. I'm all for having an improved case design! I'd love to have a 'hat' case that just securely slides on from the top that copies the design of...

> I designed a single piece thin wall l cap out of black ASA that slides on over the upper section of the sensor. The goal was to protect against...

You beat me to it! Quite the upgrade! Printed in PETG. Good fit at default size but maybe a bit better at 101%.  

I used PETG because my printer was setup for it. I would use white PLA but I don't have any at the moment! I have found the photosensor to be...

@hallsny I'm still interested in getting a copy of the slim case if possible. Thanks!