Jipé

Well! If you don't need anything, you can always ask ... It is all the same a pity that the number of the tool being machined and its TLO are...

The notation "TLO" is ambiguous since it denotes both the tool length offset and...the height of the probe. As far as I'm concerned, only the height of the probe needs...

To complete my answer, I'm using FreeCAD to generate the GCode and I modified the Grbl post processor to display the current tool references in the bCNC status banner. On...

I don't use the WCS option because it shifts the Z reference at each tool change; This poses a problem if one of the tools breaks. As the reference is...

Here is the modification I made to the CNC.py file: 2 lines to be inserted at the position indicated by ">>" lines.append("G49") # reset TLO The current TLO must be...

It's not going to be easy to find help from the developer team that currently maintains the code. It seems that the compatibility between bCNC and grblHal is not total...

Ctrl-X >> Reset. The loss of the TLO on a reset is normal since the machine is reset. This will require redoing the Machine Origins and restarting the machining cycle;...

Sorry for the late response. If I understood the question correctly, it is about updating Z0 taking into account the height of the sensor/touch plate. In this case you must...

I think some Gcode keywords are not recognized by bCNC. Is the Gcode generated by Inscape compatible with bCNC?

Is this your first time using Inkscape or is it a new version that doesn't work? Is it machining with complex shapes or basic work? The editor only displays the...