Jim Konish
Jim Konish
This needs to be tested before it can be merged. Added to backlog.
Hi @cletusw, this is a good suggestion, and may go into a future update to the SDK. In the meantime, you can edit the port in sphero_sdk/observer/client/dal/serial_observer_dal.py. This will work,...
Please make sure you connect your RVR to the Sphero EDU app on Android or iOS to ensure it has the latest firmware. The original factory firmware was not feature...
@fluffyWuffy if it needs an update it'll happen automatically after you connect. On Fri, Dec 31, 2021, 11:43 AM fluffyWuffy ***@***.***> wrote: > thanks @Jim-Konish Do i just connect it...
Hi, the most common causes of communication issues between RVR and a Pi are: 1. Bad wiring. Make sure you have a ground connection via either the USB port or...
The feature/use-tty-symlinks branch uses serial0 to access the UART. IIRC this will always point it to the UART connected to the GPIO header. After that, you can use either of...
We tested on the Pi 4 and didn't have any issues after making the updates to the setup process that we released in December. If you have not connected RVR...
It's possible the Pi has a bad UART, or it might be configured incorrectly. You may be able to look for other resources on Pi UART troubleshooting to figure that...