Introduction

jq_flasher is small python project which let you upload image onto BL702.
It implements ISP protocol designed by Bouffalo Lab Team.

ISP protocol

Most of information about bootloader's protocol can be found here:
https://github.com/bouffalolab/bl_docs/blob/main/BL602_ISP/en/BL602_ISP_protocol.pdf
Missing commands has been reverse engineered by using logic analyzer

Why?

The original soft for flashing BL MCUs is quite messy and hard to analyze.
My main goal was to replicate only the part responsible for actual flashing via UART and add some custom behavior in order to automate the process of entering the bootloader mode.

Usage

TODO