James Hughes comments

Results 379 comments of


                                            James Hughes

Can't save non-corrupted image files with imx477 camera

Please update your system, and retest. ``` sudo apt update sudo apt full-upgrade ```

Can't save non-corrupted image files with imx477 camera

Since you are not using a Raspberry PI OS, I doubt there is much else we can suggest. We know our official OS (32bit) works. I suggest moving to that.

raspivid --segment sometimes stops segmenting

This may have something to do with an overflow bug just reported in the latest version, and fixed with #535. This has been merged, so should appear in an update...

Raspivid could use a FPS value smaller as 1 (improvement request)

THis is not currently possible, otherwise we would have already done it.

Raspivid could use a FPS value smaller as 1 (improvement request)

I thought it was the encoder framerate stuff that went wrong, not at the camera end? It's minimum value was 1 IIRC, but I may not be RC!

Raspivid could use a FPS value smaller as 1 (improvement request)

No, not something we at RPT are working on.

EGL Context creations hangs after VideoCore crash

I doubt anyone is looking at it, unfortunately it's very low priority, and we have oodles of higher priority stuff to fix/develop.

EGL Context creations hangs after VideoCore crash

This issue will be closed within 30 days unless further interactions are posted. If you wish this issue to remain open, please add a comment. A closed issue may be...

Add Python support to arm-linux-gnueabihf-gdb from linaro toolchain

No, not abandoned AFAIK. Very little churn though. Not sure what our position is on rebuilding the toolchain.

Can you help port it to support usb cameras？

So you are asking for the HW encoders/preview display on the Pi to be used with USB cameras? Or the software (Raspistill etc),? Or both? Its still not entirely clear...