Jakob Nilsson

[The manual](http://www.aero-mate.com/images/Windward/BLDC-DZZ%20User%20manual.pdf) First I would run their startup and test guide to see that it works and has the correct nr of poles set. Please document this testing since it...

Regarding the [DIP switches positions ](https://github.com/fellesverkstedet/fabricatable-machines/tree/master/Spindle%20setup/250W%2040000rpm#switch-flip-on-spindle-driver) on the spindle driver. I want to start with some general advice. Test one thing at a time and in as small steps as...

+Add capacitor to PWM out for spindle control. Why below: Problem: The 40.0000 RPM spindle driver used in [Hedy ](https://github.com/fellesverkstedet/fabricatable-machines/tree/master/hedy-pcb-cnc) could not be controlled with the stock PWM speed control,...

Updates added to latest version: - Moved probe lines away from 5V lines - Moved 36V planes away from optocouplers. - Added 10uF on 5V, parallel with exiting 100nF -...

Yes, that is my opinion. If we in the future find that we need another capacitor or similar it's easy enough to add to the forked design. We could of...

Any more features we need before we order a set of these cards?

I'll add the logo! Last time it was winged on the laser machine due to bad focus. This is the front silk-screen as of now: 

+ and - is inverted compared to the plugs on the motors = higher risk of misstakes. Consider swapping.

Adding 3 pin limit switch plugs on the board frees up another pin to be used as signal GND for alarm, making the plug wireing much simpler compared to splitting...

**The factory soldered version of HRBL has a critical error,** the 5V voltage regulator pinout is all wrong. I was to quick when changing to a new regulator that the...