Jahnkeanater
Jahnkeanater
I would rather have too much throttle than not enough. Some quads are more difficult to flip than others. If there was a limit it would need to be configurable.
I think mode 1 and mode 3 should be swapped because to me it looks like mode 3 is actually mode 1?
I have start set to 1500 and it still sometimes starts randomly. The quick count starts when raising the throttle past 1500. It only happens some of the time. I...
Why are there 5 versions of the timer mod? Are you supposed to install both the 10 channel mod and the timer mod? Or is the timer mod supposed to...
I normally have all the switches assigned to channels. On a fresh model with default aux channel assignment the timer still starts. I reset the flash memory and re flashed...
Do you have asm files for the i6? I have experience with the Motorola hcs12. Are the op codes the same for the freescale chip?
I doubt this it a problem with the radio. Once bound a receiver will still connect to any model memory. There is no unique id for each model. Maybe your...
I have started using alwaystabilized mode when flying and it seems to fly much better than airmode. Are there any differences between the two modes or can we throw away...
> > > Is it possible that the problem similar to the following issue?After I disable the bi-direction in the betaflight configuratior. The current reading is below 5A although it...
I just updated to the latest development build of betaflight 4.3.0 and the issue was fixed. This issue must be in betaflight 4.2.8.