JN19aban

Hi, sorry for the screenshot, I was on remote location. The `dmesg` with the problem: ``` [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.1.32-v8+...

Hi, I attach an Eizo HDMI monitor for the purpose of the test,it has its own PSU. The system run headless on normal operation. Correct on the first log file...

HI, `vcgencmd bootloader_version` 2023/05/11 07:26:03 version 4fd8f1f3f7a05f7756edb1d3f15ffd7e428981f5 (release) timestamp 1683786363 update-time 1686483721 capabilities 0x0000007f The approximate frequency of the network failure is not standard. Sometimes you have to reboot 2...

Then if you have test it for 24 hours of reboots, then I might have a defective CM4 probably. From the rest 12 CM4's (which all are on the same...

Hi, Sorry for the late response, my CM4 are on remote locations. So from the 13 in total I own, the three I have tested with 6.1.32 -.34 -.36 kernel...

Hi, I have yesterday install the 5.10.y kernel on the three CM4 that have the ethernet issue and works completely fine. So there must be an issue with old revisions...

@kdoren Thank you for your response. I have installed it normally via your instructions. But the CPU Governor it is still set on demand and not on performance. The 6.1.54-rt15...

@kdoren still have issues when go RT like it was on 6.1.y branch? I tried but seem to have an ultra high latency for my application on 6.6.31 and I...

I have found a solution for testing it by disabling the `Network Manager` and install the `dhcpcd`. 1. sudo systemctl disable NetworkManager 2. sudo systemctl stop NetworkManager 3. sudo apt-get...

Yes I can confirm that is disabled. The output: `NetworkManager-wait-online.service - Network Manager Wait Online Loaded: loaded (/lib/systemd/system/NetworkManager-wait-online.service; disabled; preset: enabled) Active: inactive (dead) ` So far it seems to...