Ianjkingsf

Results 5 comments of Ianjkingsf

Unable to have Adafruit 1.3" LCD display anything

Hey Jon, I had to order an itsy bitsy and all the accessories. Your instructions are unclear about the ground once you wire the three pin poly to the its...

Unable to have Adafruit 1.3" LCD display anything

The 1.3 LCD same as the guy above. ![IMG_2640](https://user-images.githubusercontent.com/73578429/97406151-64449080-18be-11eb-9373-95a675b15cca.jpg) ![IMG_2641](https://user-images.githubusercontent.com/73578429/97406172-6b6b9e80-18be-11eb-823c-f7f983a101ef.jpg) ![IMG_2644](https://user-images.githubusercontent.com/73578429/97406182-70305280-18be-11eb-9349-067316bc7694.jpg) ![IMG_2646](https://user-images.githubusercontent.com/73578429/97406198-745c7000-18be-11eb-95bd-ec97e1f8ea7e.jpg) ![IMG_2647](https://user-images.githubusercontent.com/73578429/97406204-76263380-18be-11eb-80ff-763546042b5a.jpg) I am new to soldering.

Unable to have Adafruit 1.3" LCD display anything

As you can see, I soldered the ground from the LCD to the top of the ground on the poly, which is three-pin soldered to the its bits.

Unable to have Adafruit 1.3" LCD display anything

I did all the software and code editing. That is not the issue. Also, I did just connect the TCS. No change. The LCD lights up black screen, but no...

Unable to have Adafruit 1.3" LCD display anything

I've added the TCS connection. The leads and pins are correct. However, the blob might be causing a short? How do I ground the LCD screen on top of the...