Dejan Petrović
Dejan Petrović
I have this board. It is based around STM32F415RG MCU. https://www.mikroe.com/clicker-stm32f4 It shows up as a USB Input Device in Human Device Interfaces. When hit Reset it shows up as...
I tried to build a stand-alone programmer and a simple board with 4809 but something I didn't do good enough. UPDI programmer This programmer I made according to the schematic...
I have a project where I use Atmega328p MCUs. As these shortages step in, I buy what can be bought. Atmega328pb for instance... Here comes the problem. My bad as...
I have an OLED C from MikroE. This is an SSD1351 96X96 SPI display. With these examples here, I get flipped text, or whatever. Besides library is written for 128x128...
Doing a few experiments with the WB3S module and Uno. How can I change default UART pins to, say, 6 and 7? Can I work with WB3S using AT commands...
I use setDigit() to write a character on a 7 seg. How to delete that character, so nothing is displayed? Not to write 0, but to print nothing?
I am up to use this IC for a PWM. Do I have to use exact pins? Or I can use any of the digitals from UNO?
I have a hard time making this lib work with the ESP32 dev kit. First and above all. My wiring is OK as the SD lib works great. This lib...
As the title says, does this lib support the ST7920 LCD display in a resolution of 128x32? It has a 7-pin header. https://www.aliexpress.com/item/1005004110848636.html
I made exactly as you did. With the same components, and I get nothing. If I connect fOut to analog pin I can see values from 509 to 512. CMD324...