INPoppoRTUNE

Thank you so much Jeremy, that's an incredible valuable info to have! Any news about those additional attributes?

I'll try dig a bit into this rabbit hole then. Thanks again for this porting, it's working wonderfully!

While digging I found out a possible missing piece: - for the fan speed it expose `suction_grade`, settable through `vacuum.set_fan_speed` - for the water dispensed it expose `water_grade`, but no...

> It looks like the newer python-miio has broken compatibility with this vacuum, some commands work: > and others do not: As promised I tried to dig the rabbit hole...

> * for the water dispensed it expose `water_grade`, but no service seems to be present to manually set this value. Also, regarding this issue, it seems to be possible...

> I've mapped out the err_state values to the English app wording here: https://gist.github.com/jeremysherriff/786457fd0bdbadf0a43d564889c17900 > > I define a Home Assistant `command_line` sensor that takes the err_state value as a...

> Hiya. There should be something in the System -> Logs (check both the Core and Supervisor logs, I can't recall which). You should also be able to run the...

At the moment there's no service exposed in Home Assistant to set the water grade, but [we might be onto something](https://github.com/KrzysztofHajdamowicz/home-assistant-vacuum-styj02ym/issues/37#issuecomment-1214867858). If you're able to test the scripts let me...

That's good news. Let's wait to hear from @KrzysztofHajdamowicz, then it may be committed.