I-Connect

Hi, We are running Blynk on an ESP32 connecting via a GSM module. I am working on reconnecting GPRS in case of errors like a failure on the provider side....

SIM7000 looses (MQTT) connection every ~14 hours

10

Hi, We use a SIM7000E with an ESP32. We use pubsubclient for MQTT. And we do a NTP timesync every 24 hours We run a task that handles the whole...

Sim7000E difference between networkmodes automatic and GSM/LTE only

17

Hi, I am using a SIM700E with an ESP32. When trying to connect to a network the first time with a new sim7000 and networkmode set to "automatic" (CNMP=2) it...

Is there a max nr of messages within a specific time on 1 characteristic

2

On connect our esp32 sends all sensor values (18 with a total size of around 125 bytes for all messages) via separate notifications on 1 characteristic. Only 15 are processed...

temp buffer overflow possible

1

Hi, I am using your lib and want to point out a potential issue. We had an issue with reading VE-Direct frames from the (software) serial buffer. This caused strange...

BLE whitelist filtering not completely working or gives error

3

Hi, As there is a lot of BT traffic I wanted to use the whitelist, so I add all my devices (a Nuki smart lock and some different enocean switches...

Can you set the BLE channel used?

2

I am having some (intermittent) issues connecting to a BLE device. My suspicion is that there is interference with wifi, ZigBee or other BLE devices that I have running here...

Always update socketRecAvailable when called, #259

2

https://github.com/arduino-libraries/Ethernet/issues/259