esp8266-vindriktning-particle-sensor
esp8266-vindriktning-particle-sensor copied to clipboard
Hypfer
Wifi MQTT Data Logging via an esp8266 for the Ikea VINDRIKTNING PM2.5 air quality sensor
a pull request was made to esphome to simplify building the firmware for a device like this (reading the sensor data as it comes in). Making use of this is...
So I set up an MQTT broker and linked it to Home Assistant, and I soldered the board in and flashed it, and ran the config from its ad-hoc network......
Hi, from some weeks I have a problem with the measurement: the sensor show always 0ug/mc... which could be the problem? 
hello, first of all thanks for your development. the installation went smoothly, the sensor works fine, but the web interface is not available, when I want to change the setting,...
Situation: vindriktning with small self-made esp8266 board that sends the values to my IOT system. Readout function based on this git repo. Over the last 2 months the pm2.5 values...
Not sure how to fix incorrect display values? He's been showing me 200-260 for some time. And it will never go down. I also tried to vacuum and it didn't...
I am unable to determine the OTA password, i see where it gets set but I cant figure out where it gets configured
- working with VScode I'm insecure which libraries to use. lib_deps = bblanchon/ArduinoJson@^6.18.3 tzapu/WiFiManager@^0.16.0 knolleary/PubSubClient@^2.8 - Config.h,Types.h and SerialCom.h already in scr folder but "compilation terminated ... include files not...
Hello everyone. I have my own web communication on ESP32 and i need only take values from sensor. Am I understand right that i need only SerialCom.h library and calling...
You mention in the README that the ESP8266 is 5V-tolerant, but then you mention the regulator. If you connect the 5V pad to the 5V pin of the ESP8266 board,...
