esp8266-vindriktning-particle-sensor
esp8266-vindriktning-particle-sensor copied to clipboard
Hypfer
Web interface problem
hello, first of all thanks for your development. the installation went smoothly, the sensor works fine, but the web interface is not available, when I want to change the setting, I cannot reach anywhere. I completely deleted the esp card, I reinstalled it many times, but the problem was not solved, what can I do?
Hey, I had the same problem. Manually trying to access 192.168.4.1 worked for me though.
Hi, Did you solve it, I am in the same situation? I can connect to the AP and ping 192.168.4.1 but cannot connect with browser.
Were you at some point able to connect the device to your WiFi? I figured out that as soon as the WiFi connects, there's no way to change any settings, even if for example MQTT-settings are wrong. I had this issue and you can 'solve' it by removing the connection to your WiFi. This way, the esp will go back to AP-mode. Easiest solution is to turn off your WiFi until you've changed the settings. If that's not possible try wrapping a bit of aluminium foil around the esp to block the WiFi connection. Can be a bit tricky to figure out how much foil you need in order to be able to connect (e.g. with a phone) and block the WiFi but it worked for me.
I am not able to connect to web interface at all, not a single time. Probably due to Issue #61