HuHu
HuHu
Receivers: Frsky Archer plus GR6, Archer GR6, G-RX6, RX6R, RX4R I selected the wrong TX - it is not FrSky X9 Lite / Lite S but **FrSky Lite pro** Failsave...
failsafe set to receiver - **NO CHANGE**
Did some additional tests - problem exists under ELRS too.
Some more tests - **FALSE PULSES** at PPM-out (external bay) too.
What is -102 in your log? Is it an SBUS value?
I checked the SBUS-out signal on my receiver - seems to be OK - NO FALSE PULSES
I have to correct my SBUS-measurement. The time was apparently too short. The pause between false pulses is significantly longer with SBUS. Another interesting finding is that the error does...
NO FALSE PULSES when SOURCE is a SWITCH - measurement time more than 30 minutes.
All 4 sticks and the 2 pots are affected. Do you suspect a problem reading the analog values?
An interesting finding: If the parameter "Slow / Down" is set in Mixer, the false pulses disappear - that looks pretty strange ;-) 