Horus-K

是需要一个健康检查接口，现在再测试中使用的是 echo status | nc -i 1 机器IP dubbo端口 还有一个是： readinessProbe: exec: command: - "sh" - "-c" - | curl "http://nacos-80/nacos/v1/ns/instance?serviceName=xxxxxxxx&ip=${MY_POD_IP}&port=20880&healthyOnly=true" | grep '"healthy":true' 但这个一开始会通过，检查几次后就会失败

apisix 2.11 是否能够无缝切换到3版本？

老哥有解决么，今天报这个错没有啥头绪

``` [root@iZbp1imzcyvws0523mzrg4Z ~]# netbird status Daemon version: 0.24.4 CLI version: 0.24.4 Management: Connected Signal: Connected FQDN: ss-pre1.netbird.selfhosted NetBird IP: 10.255.248.87/22 Interface type: Userspace Peers count: 10/22 Connected C:\Users\vvv>netbird status Daemon...

``` [root@iZbp1imzcyvws0523mzrg4Z ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination CILIUM_INPUT all -- anywhere anywhere /* cilium-feeder: CILIUM_INPUT */ ACCEPT tcp -- anywhere anywhere tcp dpt:openvpn...

[root@iZbp1imzcyvws0523mzrg4Z ~]# netbird status --detail Peers detail: qh.netbird.selfhosted: NetBird IP: 10.255.249.205 Public key: Status: Connected -- detail -- Connection type: P2P Direct: true ICE candidate (Local/Remote): srflx/srflx Last connection update:...

After setting up iptables, the network can be connected ， but，I want to know why the https protocol does not take effect 

> > After setting up iptables, the network can be connected ， but，I want to know why the https protocol does not take effect  > > @Horus-K can you...

ifconfig wt0 mtu 1420 in LAN 1 ``` >curl https://xxxx.com/xx/awb curl: (28) SSL/TLS connection timeout

in ss-pre-1 [root@iZbp1imzcyvws0523mzrg4Z /]# tcpdump -i any -n host 101.132.xxx.xxx and port 443 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL...