HiroKwok comments

Repositories
Issues
Comments

Results 2 comments of


                                            HiroKwok

Problem: TMC driver not detected after reinitialize, only one axis driver test passed at the beginning.

> Show a photo of the controller. How do you set the address on the drivers? ![1](https://github.com/bdring/FluidNC/assets/24369941/886dd063-a77f-438b-afd8-84ae1b81cd8a) I try to change the resistance between Urat1 TX and RX ，from original...

Problem: TMC driver not detected after reinitialize, only one axis driver test passed at the beginning.

> How do you set the address?? ![80385a4c9e6312cc1da35473adefb2e](https://github.com/bdring/FluidNC/assets/24369941/bc8cfe9d-8a3b-4f55-969a-bac9693c6dc9) I set the address via jumpers. Finally, I adjusted the resistance to 100Ω, and the problem seemed to be solved, and all...