HerrFrodo1

Dear fhorst1, thanks for your short summary. Maybe it's because of my bad English, there's so much writing around it :-) Thanks also for your tips - I really have...

Thank you fhorst1 for your explanations and tips! Can you recommend a good contactor?

Dear Horst, thank you for the tip too. I hope Stuart and his friends can program it. Maybe he has another good idea. Yesterday Amazon brought me 2 adjustable time...

That would be great! Thanks! On the hardware side, you then need an additional 48-60V contactor (for 16S) with the same coil voltage as the main contactor - only significantly...

Hi! Here is my solution for preload Victron MPII or Quattro II or whatever :-) [Preload-Inverter.pdf](https://github.com/stuartpittaway/diyBMSv4/files/13753445/Preload-Inverter.pdf)

@chapulino Hi chapulino, have you been able to try out what happens when you turn your wifi off and on again? Or do you only switch it on again after...

@chapulino Thank you very much! Did you wait a few minutes? After a few minutes my ESP32 won‘t connect to wifi again :-( I also use IOBroker as MQTT-Server. Maybe...

Wifi has -40dBm. Yes, same firmware. I made a little test and deactivated MQTT in diyBMS and ioBroker. Thats it! MQTT is the murder! Without MQTT, wifi is 30sec after...

YES! LAN is the solution!!! ;-)

@red0909 >well i dont have a fritzbox, but i had also to replace my wifi router because some esp32 have not connected to my previous one...< Which other router you...