Hedda

> I dont think the Openthread NCP is standalone like the Zigbee ones. You need wpantund to provide the ipv6 network layer As I understand it, you would still need...

@alexyuoouy Are you having issues with [ZHA integration in Home Assistant ](https://www.home-assistant.io/integrations/zha)or [Zigbee2MQTT (and if so "ezsp" or "ember")](https://www.zigbee2mqtt.io/)? Zigbee2MQTT only having experimental support for Silicon Labs however they have...

Related to https://github.com/darkxst/silabs-firmware-builder/issues/48

@wastez the previous version has been problematic so risk is that this is too, see https://github.com/darkxst/silabs-firmware-builder/issues/48

If using MultiPAN RCP firmware then you need to install the Silicon Labs Multiprotocol add-on as it acts as EZSP daemon: https://github.com/home-assistant/addons/tree/master/silabs-multiprotocol https://skyconnect.home-assistant.io/procedures/enable-multiprotocol/ https://github.com/zigpy/zigpy/discussions/894 You must also reconfigure the ZHA...

Apparently, it is USB discovered by VID/PID "**_1a86:55d4_**" and product USB identifier "**_QinHeng Electronics USB Single Serial_**" or with serial by-id as "**_usb11a86_USB_Single_Serial_54F7005713-if00_**" (where "54F7005713" is the serial number). https://www.domo-blog.fr/zvidar-zigbee-matter-thread-dongle-domotique-jeedom-home-assistant/...

FYI, they are now finally the Eversweet Max model on Amazon EU and Amazon US, see example: - https://www.amazon.de/-/en/Drinking-Fountain-Dispenser-Intelligent-Extremely/dp/B0CXPG7K79 - https://www.amazon.com/PETKIT-EVERSWEET-MAX-Automatic-Replacement/dp/B0CXHM344N

> You can try convincing the zigbee-herdsman folks to reconsider their stance on the RCP firmware. FYI, be aware you are probably unlikely to convince [Koenkk](https://github.com/Koenkk) and [Nerivec](https://github.com/Nerivec) in any...

FYI, build your own firmware check out Nabu Casa’s silabs-firmware-builder project: https://github.com/NabuCasa/silabs-firmware-builder and this fork for alternative manifest for other adapters: https://github.com/darkxst/silabs-firmware-builder PS: Note only EFR32MG2x and EFR32MG3x will be...

> I'd say users should migrate away from using the Xiaomi Multimode Gateway as a zigbee coordinator, a zb-gw04-1v2 literally costs $8 on Aliexpress. ZB-GW03 (ESP32 Zigbee Bridge) is not...