Hedda

> I only have one xiaomi door sensor that refuses to connect through it. FYI, check out these tips -> https://community.hubitat.com/t/xiaomi-aqara-devices-pairing-keeping-them-connected/623 Summery, many Aqara and Xiaomi have buggy firmware that...

> Router firmware would be a problem for skyconnect as it doesnt have a boot button. Once installed you wouldnt be able to flash ever again. FYI, if you brick...

hmm, maybe I am wrong about this for the SkyConnect as believe that Nabu Casa has for example implemented a manufacturer specific command in their official OpenThread RCP firmware which...

Any chance someone here is interested in putting together a generic always-on Zigbee Router (ZR) device application for/with Silicon Labs Gecko SDK (GSDK) that could be reused in silabs-firmware-builder for...

> This is a problem, there is no way out of router firmware once flashed, as need hardware bootloader reset to re-flash normal firmware. So maybe not build Zigbee Router...

> Any chance someone here is interested in putting together a generic always-on Zigbee Router device application for/with Silicon Labs Gecko SDK (GSDK) that could be reused in silabs-firmware-builder for...

> The simplest case is to use our ZB-GW04, because it provides a hardware button that can force the bootloader to stay at any time. @xsp1989 any chance you provide...

> If you use the 6.x version of the SDK to develop routing firmware, it is actually quite simple. You only need to select the device type and generate the...

> You could try SMLIGHT SLZB-07, I believe that has a router firmware available on the SMLIGHT web flasher. Noticed according to the SMLIGHT SLZB-07 used manual it too does...

> Better 7.4.2 since it is ember compatible. That is not relevant here. Zigbee Router device compatible is not the same as Zigbee Coordinator compatibility. Zigbee Router devices are backwards...