Tomas Mudrunka
Tomas Mudrunka
Works for me. Do you still have this problem with lastest master?
Does this still happen? update: yes it does: ``` Traceback (most recent call last): File "svg2gcode.py", line 60, in generate_gcode() File "svg2gcode.py", line 51, in generate_gcode for x,y in p:...
I've used inkscape to break your svg into subpaths and one of the paths it created was empty: ``` ``` probably svg2gcode should detect this and avoid processing such zero...
I'll try to transform these ideas to some rough schematics...
My device have not arrived yet. Do you think you can use multimeter to measure resistance of the tip when it's completely cold at room temperature and immediately after firing...
Another idea with less components using only 2 ADCs. This will work only with heater transistor turned off. Major drawback is, that it will consume 10mA in standby mode! Also...
I am not sure if attiny13a features differential ADC, that might be useful to improve precision of shunt reading. However it has analogue comparator, which might be similary useful in...
Well i don't really thinked this 2.5V thing thru. It's there just, because we can't really be sure that there's 5V on input of soldering iron and that would make...
If resistance is too small to measure, you can still apply 5V to the tip and measure the current that it takes. Then it's easy to calculate the resistance using...
> Well, in that case my USB meter shows currents between 0.8 A on low temperature profile This will not give you any useful data, as the current is artificialy...