GregValiant
GregValiant
Thanks for the report. I was just talking to someone else about the Cura coordinate system and it is truly confusing. - For the purpose of Gcode and SOME things...
Swapping the Ymin and Ymax brings them into alignment with the "model" coordinate system with +Y being the front of the machine. I have a 5015 fan hanging off the...
I see the same thing (looking in FlavorParser.py) and the behavior does appear to go back to at least 4.13.1. Arc Welder's G2 and G3 lines continue to be unsupported...
Thanks for the report. Cura always assumes a model is in millimeters. When a model comes in at the wrong scale (for example it was modeled in inches) then Cura...
@LilBub Your StartUp gcode doesn't contain any Cura Keywords for the bed and hot end temperatures. That means that the temperature "prepend" will be put in. There are two settings...
I'll stick the bug label back on. I went through the U2 definition and the U2Plus definition and there are no over-rides for "Wait for nozzle heatup". Going deeper -...
Thanks for the report. The infill has been handled that way for a while now. 100% Infill Density creates a solid block of plastic and the pattern the plastic goes...
Thanks for the report. I didn't have any trouble slicing the STL. We'll need a Project File ("File | Save Project") to investigate this.
You must post directly to the site. Email does not work (Github rules, not mine).
Thanks for the report. Without a project file there is nothing that can be done with this. Using my Ender 3 Pro and my settings there is no problem. You...