Vladimir Sokolov
Vladimir Sokolov
### Is your feature request related to a problem? When switching from one printer to another, the profiles of other printers remain visible. This creates confusion when using profiles. You...
Hello, I found a problem when processing the g-code with the G2 and G3 commands. The problem is that the firmware repeater and the repeater host process the arc so...
Hello, I decided to try firmware 2.0 again. but I still can't even compile it. I did according to the instructions  changed the motherboard to ramps  added a...
Hello. TMC2208 drivers are controlled by the UART interface. Is it possible to add support for TMC2208 drivers in firmware (1.04)?
Hello. I caught a new bug on firmware 1.03 and 1.04. The error is connected with the K-factor and L-factor. If you set one of the factor > 0, an...
Hello, I found another bug because of which you cannot start printing again The reason of this bug is not clear, but it appears in several versions 1.04 It is...
**Is your feature request related to a problem? Please describe.** When cut, the gizma obscures a thin object, and this does not make it possible to make a visual cut...
By default, it is white and it is hard to see what is drawn. Is it possible to set a different color through the registry, maybe there is a separate...
### Is your feature request related to a problem? Please describe Please add a function to reprint the last file using macros for example, using the expression {action_respond_info('action:start')} or you...
### OrcaSlicer Version 1.9.0 ### OS version Windows 10 ### Additional system information _No response_ ### Printer Delta ### How to reproduce 1) upload any stl file to the orcaslicer...