Pavel Mikuš

We have fixed the issue where the extra perimeter connected on a wrong spot to the previous perimeter and then the pattern broke. This could happen especially when there is...

This will currently happen, when the anchoring area is not large enough for all the generated bridging perimeters. Because this feature was NOT originally developed to allow printing without supports,...

It will be fixed in the next release. The algorithm will choose to print anchored extrusions first. Note that this on its own does not ensure printability, as on complex...

We tested the provided 3mf in the new Alpha 5 version and fan over bridges seems to work correctly. Also, the upcoming Alpha 5 will introduce Dynamic Fan Speeds in...

Sorry, I meant to write bridging perimeters. Bridge Fan Speed is currently applied to bridges and also "Overhang Perimeter" features (extrusions marked by dark blue color in Gcode preview in...

Thank you for the report. We know about the issue, it sometimes happens on simple models with straight walls, where the detection of overlap of two consecutive layers fails. We...

Thank you for this PR. Regarding the bugs and issues around dynamic overhang speed, especially those that cause violation of speed limits, we have fixed them into the next Alpha4...

It will be fixed in the next release. The algorithm will choose to print anchored extrusions first. Note that this on its own does not ensure printability, as on complex...

The upcoming Alpha 5 will introduce Dynamic Fan Speeds in Cooling section. Similarly to dynamic overhang speed, you will be able to set fan speed for certain extrusion overlap levels,...

Thanks, that is an interesting point about the consistent surface finish. Please, show your results if you do some testing.