GioMez

Had the same problem. That fixed it. Thank you!

> * Did this work pre 1.40.0? Yes, the issue appeared after I updated Z2M two days ago. Could it be related to #https://github.com/Koenkk/zigbee2mqtt/issues/22030 ? > * Could you provide...

> @GioMez can you double check that `Lampada Esterna Balcone` does not have the off transition bug with z2m 1.39.1? It's very strange that this worked for you while it...

> @GioMez so all of your Ikea bulbs on which the off transition works are on firmware 1.x.x or 2.x.x? If yes, then I will only disable the onoff transition...

> Issue #22030 present AT LEAST on [LED2109G6](https://www.zigbee2mqtt.io/devices/LED2109G6.html#ikea-led2109g6) with 1.0.38 firmware. LED2109G6 was the only in which I saw the issue #22030 (now fixed with 1.40.0+). > Note that we...

Just updated to 1.40.2 and it works flawlessly! Transitions are back and, if I turn OFF the lamps twice, there is no sign of #22030. I tested single bulbs and...

> Cannot confirm. Problem persists. Which one? No transitions when turning off or #22030 ?

It seems to be a regression introduced with ESP-IDF 5.4.2+ https://github.com/espressif/esp-idf/issues/17459 https://github.com/espressif/esp-idf/issues/16764 In both reports users describe UART RX echo/loopback behavior (TX data appears immediately on RX without the external...

As suggested in https://github.com/esphome/esphome/issues/11038#issuecomment-3374955358 i tried this configuration, with the workaround of resetting the pins on boot: ``` esphome: on_boot: - priority: 1001 then: - lambda: |- gpio_reset_pin((gpio_num_t)17); gpio_reset_pin((gpio_num_t)16); esp32:...

> As suggested in [#11038 (comment)](https://github.com/esphome/esphome/issues/11038#issuecomment-3374955358) i tried this configuration, with the workaround of resetting the pins on boot: > > ``` > esphome: > on_boot: > - priority: 1001...