GianCann

This is my starting point: https://github.com/GianCann/ATS/blob/master/ESP32_LEGO/PUPHubEmulator.ino Video: https://youtu.be/vdZUJM3Gj-o

I resume this post... I want to try to impersonate the Color Sensor with a different hardware. Starting from the data captured by @dlech I have wrote this code: ```...

> 1. The device info section (at 2400 baud) should be repeated until a connection is made Yes. If the sensor don't receive ACK from the hub in 1 second,...

No... do you think that this product it is good for me? https://www.amazon.it/AZDelivery-Logic-Analyzer-Parent/dp/B07ZDF18W1

Boost Color Sensor data in Google Sheet format: https://docs.google.com/spreadsheets/d/12pC1mJYzqdmGBvYqUXoseGNsVBxPltWDnVcR6G_bLVA/edit?usp=sharing

I tried to connect the sensor to an USB-Serial adapter, to read the handshake data (2400 bps ,8n1). I powered the sensor with 3.3v. The Pin 1 & 2 are...

@dlech I tried both combinations.


Ok, finally!!! 

@dlech there is an error in your dump ;) ... 52 'R' 45 'E' 45 'F'