Gerald

Similar issue on Fedora Linux 39.20240320.0 (Silverblue) with Nextcloud with Nextcloud Client Version 3.12.2 from flathub. Actually even less is displayed now. Screenshots here: https://help.nextcloud.com/t/desktop-client-broken-on-gnome/184571/7?u=geraldco I remember some weeks ago...

I found a temporary solution for my problem: https://github.com/flathub/com.nextcloud.desktopclient.nextcloud/pull/130#issuecomment-1903355255

I experience a similiar problem with Arduino IDE 1.8.5. I tried also different GSM libaries (version 1.0.0, 1.0.5 and 1.0.6), but still the AT commands look different compared to Arduino...

I made a new finding today. I removed the original GSM libary from IDE 1.0.5-r2 and replaced it with the GSM libary form IDE 1.8.5 which has version number 1.0.6...

Where can/should I report this issue with the IDE?

sudo dmesg shows following output: traps: sdrangel[7131] trap invalid opcode ip:7f89cb56e384 sp:7ffef6ff8fe0 error:0 in libsdrbase.so[7f89cb343000+242000]

There is a flag with sse4_2, I would guess it is supported. lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 48 bits physical, 48 bits virtual Byte Order: Little...

here some further info to my hardware # Systemdetailsbericht --- ## Berichtdetails - **Erstellungsdatum:** 2024-04-23 09:57:12 ## Hardware Information: - **Hardware-Modell:** ASUS KCMA-D8 - **Speicher:** 15,5 GiB - **Prozessor:** AMD...

And I use following receiver: [ 520.562356] usb 2-1: Product: NESDR SMArt v5 [ 520.562363] usb 2-1: Manufacturer: Nooelec

seems like a Pulsaudio config is missing. Why is a pulseaudio config needed and what to configure? :~/Downloads$ flatpak -v run org.sdrangel.SDRangel F: No installations directory in /etc/flatpak/installations.d. Skipping F:...