Galland
Galland
Your device pid (310c) is unknown to this tool. It was tested against these pids: 0x290a, 0x281a, 0x300a, and 0x310b In any case, if you know that your device uses...
Your device pid (330d) is unknown to this tool. It was tested against these pids: 0x290a, 0x281a, 0x300a, and 0x310b Can you share what is the name of your device?...
hola, dump just lists gpio names and numbers, so the result is likely to be the same in those 3 points in time. As I understand it, you use it...
There is no GPIO bank 5 in RK3066, it jumps from bank 4 to bank 6, so pin 359 would be: (359 - PIN_BASE) / NUM_GROUP = (359 - 160)...
That is the correct GPIO for the stick where you got that gpio dump ;) Which one is it?
Yes I'll try that. I'm currently uploading the code to: https://github.com/Galland/MTK5931 If you want to follow-up on my findings, I've been posting everything to http://hwswbits.blogspot.com
I'm stuck with that part :( I moved to the 3D. I wish you better luck with it!
That's great! we have been working on this, but did not get it to work. Could you elaborate on how did you integrate the MTK5931 repo into the picuntu kernel?...
Here is the latest MT5931 WIFI_RAM_CODE (released today!): https://github.com/aloksinha2001/Linux3188/tree/master/drivers/net/wireless/mt5931/firmware_5931 About the gpio, the pins are likely to be the same for many other sticks since they tend to copy Rockchip's...
You have done an excellent job with this. Thank you very much! We are currently working very hard on the last released kernel (which includes rk3188 support), which may include...